MS6 stainless steel non contact safety switches from the Mechan Controls Magnasafe range are easy to install and fully encapsulated to IP67.
Manufactured from stainless steel grade 316, the MS8 is available in 3 metre, 5 metre or 6 metres cable input lengths or with plug in QD connector. They have a non contact distance of 10mm which ensures a wider range of tolerance between actuator and switch helping to prevent misalignment.
- Magnetic slim line non-contact safety switch.
- Non-contact switch ensures higher reliability and longevity with no mechanical parts to wear or break.
- 2 magnetic safety blocks for non-contact safety applications.
- Contact Configuration: Available with 1 N/O,1 N/O and 1 N/C, 2 N/O and 2 N/O + 1N/C contacts*
- Voltage: 24V DC (230V AC versions available on request)
- Current Rating: 0.2 Amp
- Cable Lengths: Available in 3, 5 or 6 metres pre-wired versions. Or with QD plug-in connector.
- Other variations of this product are available on request.
- Switching distance of: 10mm
- Material: Stainless steel grade 316 (ABS version also available)
- Manufacturer: Mechan Controls
- Regulation Standards: Compliant with BS and EU safety standards. See data sheet in data sheet tab for more information.
*Please note that the two normally open (N/O) are described when the switch and actuator are apart. The normally open will close when the actuator is brought within operating distance of the switch.
The Mechan MS6-SS is suitable for use in new and existing machine installations. If you're looking to replace an existing Allen Bradley / Guardmaster FRS13 or FRS14 safety switch that has been damaged or failed, the MS6-SS can be used to replace it.
It has the same contact configuration, it's the same physical size and has the same fixing centres. More importantly it is offers a more cost effective solution.
See drawing below, all dimensions in millimeters:
With 1 Normally Open Contact
- 356.058 (MS6-SS-10-DC-06M) - 6 Metre input cable
With 1 Normally Open & 1 Normally Closed Contacts
- 356.051 (MS6-SS-11-DC-03M) - 3 Metre input cable
- 356.064 (MS6-SS-11-DC-QD) - QD Connector
With 2 Normally Open Contacts
- 356.057 (MS6-SS-20-DC-05M) - 5 Metre input cable
- 356.075 (MS6-SS-20-DC-QD) QD Connector
With 2 Normally Open & 1 Normally Closed Contacts
- 356.078 (MS6-SS-21-DC-06M) - 6 Metre input cable
- 356.069 (MS6-SS-21-DC-QD) - QD Connector
- 356.051 (MS6-SS-11-DC-03M) = Guardmaster FRS14 - 440N-G02156