Mechan SS-C electronically operated safety switches are tamper proof and have a built in LED indicator which helps to easily identify which actuator needs resetting. Unlike the Magnasafe range which are non contact, the S-Type range operates on an electronic frequency.

Available in a choice of contact configurations and cable input types including a plug-in QD connector version.

The SS-C range has 10mm switching distance which ensures a wider range of tolerance between actuator and switch helping to prevent misalignment. Suitable for use with low inrush current safety relays.

Specification

• Electronic safety switch.
  
• Contact Configuration: Available with 1 N/O and 1 N/C or 2 N/O contacts.*
  
• Voltage: 24V DC
  
• Current Rating: 500ma
  
• Cable Lengths: 3 metres pre-wired or QD connector version.
  
• Other variations of this product are available on request such as unique coded versions.
• Switching distance of: 10mm
• Material: ABS
• Manufacturer: Mechan Controls
• Regulation Standards: Compliant with BS and EU safety standards. See data sheet in data sheet tab for more information.

*Please note that the two normally open (N/O) are described when the switch and actuator are apart. The normally open will close when the actuator is brought within operating distance of the switch.

Cross Reference

The Mechan SS-C is suitable for use in new and existing machine installations. If you're looking to replace an existing Allen Bradley / Guardmaster Ferrocode safety switch that has been damaged or failed, the SS-C can be used to replace it. 

It has the same contact configuration, it's the same physical size and has the same fixing centres. More importantly it is offers a more cost effective solution.

See drawing below, all dimensions in millimeters:

With 1 Normally Open & 1 Normally Closed Contacts

• 363.002 (SS-C-11-03M)  - 3 Metre input cable

With 2 Normally Open Contacts

• 363.005 (SS-C-20-03M) - 3 Metre input cable
• 363.004 (SS-C-20-LQD) - QD Connector

Cross Reference Guide

• 363.002 (SS-C-11-03M)  = Guardmaster Ferrocode 440N-C02067