Mechan MS6 Non Contact Safety Switch ABS

MS6 non contact safety switches from the Mechan Controls Magnasafe range are easy to install and fully encapsulated to IP67.

The MS6 range have an ABS stainless body, the MS6 is available in 3 metre or 6 metres cable input lengths. They have a non contact distance of 10mm which ensures a wider range of tolerance between actuator and switch helping to prevent misalignment.

Available in a choice of contact configurations and cable input types that include various lengths and plug-in QD connector systems.

Key Features

• Magnetic slim line non-contact safety switch.
• Non-contact switch ensures higher reliability and longevity with no mechanical parts to wear or break.
• 2 magnetic safety blocks for non-contact safety applications.
• Contact Configuration: Available with 1 N/O,1 N/O and 1 N/C, 2 N/O and 2 N/O + 1N/C contacts*
• Voltage: 24V DC (230V AC versions available on request)
• Current Rating: 0.2 Amp
• Cable Lengths: Available in 3 or 6 metres pre-wired versions
• Other variations of this product are available on request.
• Switching distance of: 10mm
• Material: ABS (stainless steel version also available)
• Manufacturer: Mechan Controls
• Regulation Standards: Compliant with BS and EU safety standards. See data sheet in data sheet tab for more information.

*Please note that the two normally open (N/O) are described when the switch and actuator are apart. The normally open will close when the actuator is brought within operating distance of the switch.

Cross Reference

The Mechan MS6 is suitable for use in new and existing machine installations. If you're looking to replace an existing Allen Bradley / Guardmaster FRS safety switch that has been damaged or failed, the MS6 can be used to replace it. 

It has the same contact configuration, it's the same physical size and has the same fixing centres. More importantly it is offers a more cost effective solution.