Mechan SS-R electronically operated safety switches are tamper resistant and have a built in LED indicator for a faster fault diagnosis.
Mechan SS-R electronically operated safety switches are tamper resistant and have a built in LED indicator for a faster fault diagnosis. Unlike the Magnasafe range which are non contact, the S-Type range operates on an electronic frequency.
Available in a choice of contact configurations and cable input types including a plug-in LQD leaded connector version.
The SS-R range is a standalone electronic safety switch.
- Electronic safety switch.
- Contact Configuration: 2 N/O + 1N/C contacts*
- Voltage: 24V DC
- Current Rating: 2 amps
- Cable Lengths: 3 metres pre-wired or LQD leaded connector version.
- Other variations of this product are available on request such as unique coded versions.
- Switching distance of: 10mm
- Material: ABS
- Manufacturer: Mechan Controls
- Regulation Standards: Compliant with BS and EU safety standards. See data sheet in data sheet tab for more information.
*Please note that the two normally open (N/O) are described when the switch and actuator are apart. The normally open will close when the actuator is brought within operating distance of the switch.
The Mechan SS-R is suitable for use in new and existing machine installations. If you're looking to replace an existing Comitronic - BTI AMX-Series safety switch that has been damaged or failed, the SS-R can be used to replace it.
It has the same contact configuration, it's the same physical size and has the same fixing centres. More importantly it is offers a more cost effective solution.
Specifications & Dimensions
Specifications BrandSpecifications Mechan Controls Cable Input Contact Configuration 2 N/O & 1 N/C Dimensions Located Below Specifications Table Material ABS Pack Size 1 Product TypeSpecifications Safety Switch Sku SS-R* VoltageSpecifications
AC standards for alternating current and DC standards for direct current.
Mains voltage is 230V AC and has a tolerance of 10%, some products are 220V or 240V AC which means they can be classed as mains voltage.
DC voltages usually require an LED driver to convert the mains voltage AC into low voltage DC. Popular DC voltages are 12V or 24V DC.
Q & A
Q & A
- Product Codes