The Chint range of NL1 time delay RCDs (Residual current device's) are available in a choice of poles and current ratings; please choose from the product options.
Time delay RCDs provide residual circuit protection against short circuits but also provide the correct level of discrimination when two RCD devices are used on the same circuit.
Specification
- Din rail mountable.
- Chint time delayed RCDs are a competitively priced alternative to Wylex, Merlin Gerin, MEM, Square D etc.
- Suitable for TT installations.
- Available with a 100ma tripping sensitivity characteristic.
- Operating voltage: 230/400V AC 50/60Hz.
- Manufacturer: Chint
- Guarantee: 3 years
No comment on the quality as the wrong unit was sent.
Best price for these Delayed RCD’s an they have sorted my problem. Great product so far. These are needed i believe if you have more than one RCD on the same feed, normal RCD are know as non- discriminate which means a RCD may trip in the line but that my not be where the fault lie’s
Straight swop
I ordered a 100amp 100Ma time delayed RCD forva new caravan site installation. I would highly recommend this product as it isca good quality productvatva fraction ofvthe cost of other brands that i was looking at
Double Pole
- Width: 36mm wide (two modular width).
- Height: 86mm
- Depth: 78mm (including switch)
- Width: 72mm wide (two modular width).
- Height: 86mm
- Depth: 78mm (including switch)
- CE Marked & independently tested and approved to EN61008-1
NL1 Time Delay Double Pole
- NL1-100-280/100-S - 80A 100mA
- NL1-100-2100/100-S - 100A 100mA
NL1 Time Delay Four Pole
- NL1-100-480/100-S - 80A 100mA
- NL1-100-4100/100-S - 100A 100mA
